Marco Polo
Skip to main content

Marco Polo

British clipper ship


Country of Registry
New Brunswick
Service Entry
1852
Vessel Type
museum ship: , 3 square mast clipper
Ship Type
museum ship
Current Location
46° 30' 25", -63° 25' 19"

* This information from Wikidata is available under the Creative Commons Attribution-ShareAlike License

The Marco Polo was a notable three-masted wooden clipper ship launched in 1851 at Saint John, New Brunswick. Measuring 184 feet 1 inch (56.11 meters) in length with a beam of 36 feet 3 inches (11.05 meters) and a draught of 29 feet 4 inches (8.94 meters), she was constructed primarily as a cargo vessel with a hold depth of 30 feet (9.1 meters) and a tonnage of approximately 1,625 tons. Her design featured a medium clipper profile with an unusually sharp bow, tall masts, and broad amidships, which contributed to her stability and seaworthiness. Originally square-rigged and equipped with a roller reefing system allowing sails to be reefed from the deck, she was later converted to a barque rig in 1874, with her wooden masts replaced by iron ones and yards shortened. Constructed by James Smith at Marsh Creek, her build faced initial setbacks when a storm scattered her frame during construction, causing her keel to curve slightly. Despite a rough launch—touching the creek bank and becoming stuck in mud—she was refloated two weeks later and registered in May 1851. Marco Polo’s service history was distinguished by her role in emigrant and passenger transport to Australia. She was the first vessel to complete a round-trip from Liverpool to Australia in under six months, making about 25 such voyages. Her first voyage in 1852 carried over 900 passengers, including Highland Scots, and she established a reputation for speed, claiming the title "Fastest Ship in the World." She regularly completed Liverpool–Australia routes in approximately 80 to 90 days each way, with notable voyages including her record-setting return trip in 76 days, surpassing steamship times. Throughout her career, she experienced several near mutinies, collisions, and damage, including an iceberg collision in 1861 that damaged her bowsprit and foremast. From 1867, she was repurposed as a cargo ship, transporting guano, coal, and timber across various ports. Her later years were marked by hull deterioration, reinforced with chains and a windmill pump, culminating in her grounding off Cavendish, Prince Edward Island, in 1883 during a gale. The wreck site is now a designated National Historic Site, and artifacts from the vessel are preserved and displayed in museums, including a replica named Marco Polo II constructed in Saint John. Her maritime significance lies in her speed, her role in Australian emigrant history, and her representation of the clipper ship era’s technological and navigational achievements.

This description has been generated using GPT-4.1-NANO based on the Vessel's wikidata information and then modified by ShipIndex.org staff.

Ships

13 ship citations (1 free) in 7 resources

Marco Polo (1851; Canada; sold to British for Australian trade)
Book Merchant Sail
Author William Armstrong Fairburn
Published Fairburn Marine Educational Foundation, Inc., Center Lovell, Maine,
Pages II: 1515, 1539; III: 1605, 1606, 1610, 1623, 1630, 1631, 1829, 1843, 1844, 2102; IV: 2301, 23152319, 2320 et seq. ad 2323, 2342, 2359, 2362, 2363, 2369, 2380, 2384, 2390, 2403, 2565, 2566, 2664
Marco Polo (1851) Subscribe to view
Marco Polo (3m ship; launched 1851-04) Subscribe to view
Marco Polo (Can 1851) Subscribe to view
Marco Polo (Ship; 1851, Saint John) Subscribe to view
Marco Polo (St John, NB, 1854, Sail; ON: 36664) Subscribe to view
Marco Polo (Yarmouth, 1854, Sail; ON: 8237) Subscribe to view
Marco Polo, clipper ship: in list, New Brunswick-built Subscribe to view
Marco Polo, St. John timber ship, 1851: half-model at MM Subscribe to view
Marco Polo, St. John timber ship, 1851: lines from half-model at MM Subscribe to view
Marco Polo, St. John timber ship, 1851: mentioned Subscribe to view